Products

Brazetek Shell & Tube heat exchangers are available in two series. ST series are 316L stainless steel shell and tube heat exchangers. STX series are titanium shell & tube heat exchangers. Both types are fully-welded and can be utilized in a variety of applications. Titanium heat exchangers are commonly used in marine applications such as salt water or others where corrosive liquids are present. Large connection ports are particularly useful for projects requiring high flow rates and low pressure drop. Brazetek shell and tube heat exchangers are available in 1-side shell outlets or 2-sides shell outlets versions and most models are supplied with a set of mounting brackets for ground installation. Variety of inlet/outlet sizes is available. Brazetek ST series is most commonly used as hot tub or swimming pool heat exchangers, often in combination with an outdoor wood boiler, but are also typical for projects such as snow melting, solar heating, oil cooling, heat recovery and many others. STX series heat exchangers can be used with salt water or other projects where superior corrosion resistance is required.

Brazetek offers a broad selection of finned coil heat exchangers, also known as “water to air heat exchangers”, due to their popularity in forced air heating and cooling applications. These units are suitable for a large number of projects including water to air and air to water heat transfer uses, such as outdoor wood furnaces, boilers, stoves, residential and light commercial forced air heating and cooling applications, as well as liquid chilling applications and many others.
Brazetek water to air heat exchangers feature high performance aluminum fin plates for maximum heat transfer efficiency, seamless copper coil tubing for long-lasting and leak-free performance, heavy-duty 18-gauge galvanized steel casing to insure integrity of the unit and standard 1" sweat inlet/outlet connections which make any system integration fast and easy. Heat exchanger size denoted (AxB) indicates finned area.

Need to cool your beer in minutes? Get Brazetek Beer and Wort Plate Chiller. Available in 10, 16, 20, 26, 30, 40 or 50 stainless steel plate models. Brazetek beer and wort plate chiller is small and compact, making integration into any brewing setup a breeze. The 3x8 brazed plate heat exchanger size is also suitable for small radiant heating projects as well as SVO, WVO, biodiesel applications and many others.
3/4" Male NPT connections standard on all models. Flow rates up to 15 GPM.

The 4x12 size brazed plate heat exchangers are primarily designed for medium size hydronic and radiant heating applications, snowmelt systems (glycol), domestic hot water heating, outdoor wood boiler applications, and other uses where an efficient, reliable and compact liquid-to-liquid heat exchanger is required. Models available with 10 to 70 plates.
1" Male NPT connections standard on all models.

For larger size hydronic heating projects, radiant heating, indoor and outdoor wood boilers, larger snow melting systems, domestic hot water heating and other applications that require higher flow rates and high efficiency ratios, a 5x12 brazed plate heat exchanger is the optimal choice. Available in 50, 60, 70 & 80-plate models.
1-1/4" Male NPT connections standard on all models.

A Y-strainer is commonly installed on or near the inlet connection(s) of the heat exchanger to extend it's life, prevent fouling and reduce maintenance. Brazedtek offers most common sizes of Y-strainers - 3/4", 1" and 1-1/4" (NPT) to fit with all heat exchanger models. The y-strainers are heavy-duty cast bronze and are made by Matco-Norca. Cleanout plug inlcuded, 18 mesh stainless steel screen standard on all models. 300 psi WOG (non-shock), 150 psi SWP. Threaded connections comply with ANSI B2.1.